联系我们

联系:张经理

手机: 13869104688

电话: 0531-88714295

传真: 0531-88714295

邮箱: 13869104688@163.com

网址:www.jnxdmye.com

地址: 济南市工业北路与机场路交叉口北行1000米闵鲁装饰材料城内

当前位置:首页 > 新闻信息 > 详细内容
道闸门禁系统的工作原理
来源:济南鑫盾门业有限公司 发表时间:2018-03-28

  道闸门禁体系传动部分:道闸操控板操作操控电机进行正向回转,电机带动减速机输入轴滚动;减速机在减速输出轴并带动摇臂在后半周180o的上下滚动;减速机摇臂经过下关节轴承、连杆、上关节轴承带动主轴驱动臂在后半周90o范围内作上下运动;主轴驱动臂驱动与主轴连接的闸杆在水平与笔直的90o范围内作升降运动。在传动结构上,许多厂家现已发作技术,采用齿轮联动的办法,削减惯例传动的负载才能,大大延长了道闸机的寿数和提高了运转的性能稳定性。
  
  Channel transmission gate entrance guard system parts: gate control board operation control motor positive inversion, the motor drives the input shaft of the reducer reducer output shaft in the reducer to rotate; and drives the rocker later in the week the 180o to rotate up and down; reducer rocker driving arm to move up and down in the second half of the week in the range of 90o through joint bearing, connecting rod, joint bearing drives the spindle; spindle drive arm driving brake lever is connected with the main shaft of the lifting movement in the horizontal and vertical range of 90o. In the transmission structure, many manufacturers have occurred technology revolution, by using the method of gear linkage, reduce the load ability of conventional transmission, greatly extended the life of the road gate machine and improves the performance of the running stability.
  
  道闸门禁体系平衡部分:由平衡臂、平衡绷簧组成的平衡组织能够平衡闸杆的力矩,削减驱动组织的负荷。
  
  Road gate entrance guard system part balance: balance mechanism composed of a balance arm, a balance spring can balance the gate rod torque, maximum limit reduces the load of the driving mechanism.
  
  道闸门禁体系操控部分:闸杆起杆及降杆、或停在某个笔直位的限位都是由凸轮上的笔直位磁感应支架上的笔直位霍尔传感器来操控,水平位由水平位磁铁感应水平位霍尔传感器进行操控。
  
  The gate of the entrance guard system control parts: brake rod rod and rod, reducing or stopping at a vertical spacing is by vertical Holzer sensor vertical magnetic induction bracket on the cam on the control, horizontal position is controlled by the horizontal position of magnet induction level Holzer sensor.
  
  道闸门禁体系保护装置:因道闸为车辆挡车器,在产品设计上要考虑到防砸车和人,防止因机械突发状况而引起纠纷。道闸保护装置由多层结构组成,遇操控部分失控时,闸杆上升到某笔直位后,经过机械强制性防砸刹车功用效果、强制性使电机中止运转,然后让闸杆不会处于自动降杆状况,防止砸到车或行人。
  
  The gate of the entrance guard system protection device: for gate for vehicle car, in the product design to take into account the preventing damage to vehicles and people, to avoid mechanical emergency situation caused by the dispute. The gate of protection device is composed of multilayer structure and composition, in the control part is out of control, brake lever rises to a vertical position, through mechanical mandatory anti smashing brake function, mandatory motor to stop running, so that the brake rod not in automatic drop bar state, avoid hit cars or pedestrians.


相关标签:
相关产品
相关新闻

Copyright济南鑫盾门业有限公司版权所有   鲁ICP备18010902号-1      联系:张经理